How does it work?
Using magnetic technology, after entering the rotary the Mag-Trap
continually extracts Ferrous Metal Contaminants from Well Fluids until
it is removed from the hole. The Mag-Trap is Versatile and Suitable
for many different applications.

What benefits will it bring?
Helps to achieve and maintain a Clean Fluid Environment, with all the
associated benefits to both surface and downhole equipment,
production rates, etc.

Possible Applications
Below are some possible aplications for the Mag-Trap:

• Used in conjunction with watermelon mills and reamers
• Used in tandem (6) to recover perforation debris
• Used in the recovery of control line clamps
• Have recovered plastic coated injection lines
• Used to surge conventional and sub sea BOPE
• Used to wash over perforating guns
• Used in tubing and drill pipe milling operations
• Run with and after section milling operations
• Run with equipment prior to liner hanging operations
• Used in place of surge equipment
• Used in coiled tubing operations (1 11/16” OD Mag-Traps)
• Used in whip stock operations
• Used for horizontal applications
• Effective where returns cannot be achieved
• Run in the hole prior to running production equipment
• Run with perforating guns
• Run with bit, scrapers, and brush tools
• Run with packer milling equipment
• Run in conjunction with milling and/or drilling CIBP
• Run above liners due to loss of annular velocity rates
• Run with short catch overshots to retrieve packer plugs
• Used with stinger assemblies to wash through GP settings
• Used in milling of chrome tubing
• Run with reverse circulating junk baskets to recover bearings and rings
• Used in cement milling/drilling operations when drilling out float equipments
• Run with packer plug retrieving tools
• Used in milling/drilling cement retainers
• Run in hole on E/L prior to logging operations (remove well filings)
• Run with wash pipe to wash over screen and liners
• Used in any junk milling operationsM
• Alongside the Stacey Ditch Magnet

 

Dimension and Strength Information

OD	ID	Length	Connection	Run Position	Magnets	Make-Up Torque	Tensile Strength	Assembled Weight	Box Weight
1.11/16"	1/2"	2.27'	1" AM MT	BOX-UP	7	500 #	26,000 #	60 #	80 #
2.1/8"	9/16"	4.45'	1.1/2" AM MT	BOX-UP	7	950 #	56,280 #	75 #	80 #
3.3/8"	7/8"	78"	2.3/8" PAC	BOX-UP	9	4,800 #	238,000 #	100 #	80 #
3.3/4"	1"	68.27"	2.2/3" REG	PIN-UP	9	3,700 #	340,795 #	125 #	80 #
3.3/4"	1"	68.27"	2.7/8" REG	PIN-UP	9	6,500 #	480,000 #	135 #	80 #
4.3/4"	1.1/2"	68.27"	3.1/2" REG	PIN-UP	12	7,500 #	530,000 #	225 #	80 #
4.3/4"	1.1/2"	81"	3.1/2" IF	BOX-UP	12	9,100 #	530,000 #	250 #	90 #
6.1/2"	2.1/4"	68.27"	4.1/2" REG	PIN-UP	18	15,000 #	1,260,000 #	500 #	80 #
6.1/2"	2.1/4"	83"	4.1/2" IF	BOX-UP	18	18,900 #	940,000 #	575 #	90 #
9"	3.1/2"	111"	6.5/8" REG	BOX-UP	24	43,000 #	1,800,000 #	1,200 #	150 #

Additional Sizes are available upon request. Please contact us with your requirements.

Pictures of the Mag-Trap
Below are various picture's of the Mag-Trap, both in operation, and in an as supplied condidition.
You can view larger versions of the images below by clicking on the picture.

Download Product Brochure
Coiled Tubing Mag-Trap Pictures